Built by Hauck Powersports, designed specifically for Team Yamaha'a Sno-Cross Team.  40 teeth, 15 wide.  Designed to slip under extreme tension, like that from jumping. 
Make offer
40 Tooth Slip Gear
Blenzall "Ultra" #455 2-Stroke Castor Oil
Blue 700 SX Seat
Yamaha Movable Primary Sheeve
Heavy Hitter Yamaha Weights - Notched
The ultimate racing oil developed for the new generation of higher-revving 2-stroke engines. The latest in anti-friction and Extreme Pressure (EP) additives allow maximum horsepower while practically eliminating engine wear.  Have four gallons.
$20.00 per Gallon

This seat was taken off of a '99 Model SX, but will also fit any year SX Model.  It had a couple of tares in the seat, which have been repaired, as shown to the left.  It has also had extra stuffing added for an even softer ride.
$75.00 / OBO
Good shape, slight groove in bottom where belt idles.  No hardware included.
$75.00 / OBO
Thunder Products Heavy Hitter Yamaha weights.  Have been professionally notched for higher engagement.  All hardware included.
$160.00 / OBO
Parts List For Sale  
Click Part Click Parts To Be Taken Directly
There Or Feel Free To Brows Down Page

  1. Slip-Gear
  2. Blenzall Castor Oil
  3. SX Seat
  4.  Yamaha Moveable Primary Sheeve
  5. Heavy Hitter Weights
  6. Yamaha 8CH-17641 Belts (Brand NEW!)
  7. Arctic Cat Firecat Exhaust Y-Pipe
  8. Arctic Cat Firecat / Sabercat 700 Exhaust Pipe
  9. Titanium Rods - Yamaha Viper and SRX
10. Race Trailer

This page was last updated on: August 4, 2010
<Top Of Page>
<Top Of Page>
<Top Of Page>
<Top Of Page>
<Top Of Page>
Yamaha 8CH-17641 Belts - BRAND NEW
These 4 belts are brand new and have never been out of the sleeve.  These are the "softer" compound from Yamaha, and work great for most raceing and trail applications.

Retail:  $40.00

DTR:  $25.00 EACH
<Top Of Page>
Arctic Cat Firecat Exhaust Y-Pipe
This Y-Pipe is for any 03-05 Arctic Cat Firecat model (F-5, F-6, F-7).  The Y-pipe is brand new and has never been installed or used. 

$25.00


<Top Of Page>
Terms and Conditions:
All parts are sent either C.O.D. or will ship AFTER payment is recieved.
Buyer will pay all shipping, PayPal, and/or C.O.D charges.  No Handling Fees Apply.

Acceptable Payments:
C.O.D - Money Orders Only
Money Orders Sent Prior To Shipment
PayPal - Requires a 4% Processing Fee

All Packages are sent UPS.
Lightweight Titanium Rods For Yamaha Viper Or SRX
These rods were machined by Richard Via at Pro-Ti for a Yamaha Viper or SRX Improved motor.  However, we sold the sled before putting them in.  They are BRAND NEW, NEVER BEEN RUN!  They are lighter then stock to free up HP with less rotating mass, as well as take up more space in your case.  They were machined slightly larger, while maintaining the same center-to-center distance, to help "stuff" the case, and give more power.  I have $1650 invested into the set of three, and they are just sitting here.

Make Me An Offer.
<Top Of Page>
Arctic Cat Firecat F7 Exhaust Pipe
This Arctic Cat F7 Exhaust pipe only has 800 miles on it.  It is in good condition, with no cracks or breaks.

$150.00 / OBO
<Top Of Page>